Replacer Guide Logo
Replacement for Dyson TP04
Fits: Filter S
Vacuum

Dyson TP04

4.8(389 Amazon reviews)

Premium engineered compatible part. Exact OEM specifications at a fraction of the cost.

In Stock Prime Delivery

Critical Maintenance

Warning! A clogged filter in your Dyson DYSON-TP04-B09K5YK13V can overheat the motor and destroy suction power. Dust particles may also be blown back into the air you breathe.

OEM Retail

$24.99 - $44.99

Compatible Price

$9.99 - $19.99

View on Amazon

Secure transaction & fast delivery

Perfect Fit

100% matched specs

Fast Ship

Prime available

Product Overview

Restore Suction Power to Your Dyson DYSON-TP04-B09K5YK13V

Is your vacuum losing suction? A clogged filter is often the culprit. Replacing the filter in your Dyson DYSON-TP04-B09K5YK13V is the cheapest way to make your vacuum run like new again.

Compatibility

This filter is engineered to fit the Dyson DYSON-TP04-B09K5YK13V series perfectly. It creates a tight seal to prevent dust leakage and protect the motor.

Features

  • HEPA Filtration: Captures 99.97% of dust and allergens.
  • Washable & Reusable: Rinse under cold water and let dry for 24 hours.
  • Motor Protection: Prevents dust from entering and damaging the vacuum engine.

Installation

Simply twist off the top cap or remove the bin to access the filter. Swap the old one with this new premium filter in seconds.

Installation Guide

1

Remove the dust bin.

2

Pull out the old filter.

3

Rinse (if washable) or replace.

4

Dry completely before re-installing.

Expert Deep Dive

Troubleshooting & Analysis

Identifying Common Problems with Your Dyson TP04

If you're the proud owner of a Dyson TP04, you know just how effective these vacuums can be at keeping your home clean. However, you may have started to notice some problems recently—perhaps your vacuum has lost suction power, or maybe you're detecting an unpleasant odor while vacuuming. These issues can be frustrating, but you're not alone. Many Dyson users experience similar challenges, and recognizing the symptoms is the first step toward resolving them.

Common symptoms that indicate your vacuum needs attention include:

  • Flashing lights indicating a problem
  • Persistent bad smells, especially if you have pets
  • Reduced suction power
  • Unusual noises from the motor

Understanding these signs can help you address the underlying issue before it escalates. In many cases, the solution lies in replacing the filter, specifically the Filter S for the Dyson DYSON-TP04-B09K5YK13V.

Troubleshooting Your Dyson TP04

Before you jump into replacing parts, it's essential to troubleshoot the vacuum to determine the source of the problem. Here’s a step-by-step guide to help you diagnose and potentially fix common issues:

  1. Check for Blockages: Inspect the hose and brush for any clogs. A blockage can significantly reduce suction power.
  2. Inspect the Filter: Remove the Filter S and examine it. If it's dirty, it likely needs cleaning or replacing.
  3. Reset the Vacuum: If the lights are flashing, try resetting the vacuum. Unplug it for a few minutes and then plug it back in.
  4. Unclog the Motor Filter: If you hear unusual noises, it might indicate a clog in the motor filter. Remove and clean it according to the manufacturer's instructions.

By following these steps, you can often identify the problem and determine whether a simple cleaning will suffice or if a replacement part is needed.

Cost Analysis: Original vs. Compatible Filters

When it comes to maintaining your Dyson, cost is an important factor. Here’s a comparison of the annual costs associated with using an original Dyson filter versus a compatible one:

Item Original Dyson Filter S Compatible Filter S
Cost per Filter $50 $25
Annual Replacement (2 Filters) $100 $50
Annual Savings - $50

As illustrated, opting for a compatible filter can save you a significant amount each year. This financial benefit enhances the logic of purchasing a replacement filter, especially when you consider the performance and efficiency it can restore to your vacuum.

Installation Pro-Tips for Your New Filter S

Replacing your Dyson filter is a straightforward task, but a few tips can ensure you do it correctly:

  • Flush Before Use: After installation, run your vacuum for about three minutes to flush out any dust or debris that may have remained in the system.
  • Ensure a Tight Fit: When installing the new filter, press it in firmly until you hear a click. This indicates that it’s secure.
  • Regular Maintenance: Check the filter every month and clean it as needed. Regular upkeep can prevent more significant issues down the road.

Frequently Asked Questions

Will replacing the filter void my warranty?

No, using a compatible filter will not void your warranty as long as it meets quality standards. However, always check specific terms to be sure.

How long does the Filter S last?

The lifespan of the Filter S can vary depending on usage and environment, but generally, it’s recommended to replace it every 6 to 12 months for optimal performance.

Can I wash the filter instead of replacing it?

While washing can help, it's often not enough. Over time, filters can become saturated with dust and odors, which washing can’t always eliminate. Replacing the filter is a more reliable long-term solution.

Maintaining your Dyson TP04 vacuum is essential for ensuring it operates at peak performance. By identifying problems, understanding costs, and knowing how to replace the filter properly, you can enjoy a cleaner home without the frustration of poor suction or unpleasant odors. Investing in a replacement Filter S is not just a purchase; it's a step toward a healthier living environment. Don't wait—restore your vacuum's power and efficiency today!

Specifications

Brand
Dyson
Model
TP04
Category
Vacuum
Replaces Part
Filter S

Replacement Reminder

Get notified when it's time to replace your Dyson TP04 filter. One email, no spam.