Replacer Guide Logo
Replacement for Dyson TP02
Fits: Filter R
Vacuum

Dyson TP02

4.3(433 Amazon reviews)

Premium engineered compatible part. Exact OEM specifications at a fraction of the cost.

In Stock Prime Delivery

Critical Maintenance

Warning! A clogged filter in your Dyson DYSON-TP02-B07TX5SW7J can overheat the motor and destroy suction power. Dust particles may also be blown back into the air you breathe.

OEM Retail

$24.99 - $44.99

Compatible Price

$9.99 - $19.99

View on Amazon

Secure transaction & fast delivery

Perfect Fit

100% matched specs

Fast Ship

Prime available

Product Overview

Restore Suction Power to Your Dyson DYSON-TP02-B07TX5SW7J

Is your vacuum losing suction? A clogged filter is often the culprit. Replacing the filter in your Dyson DYSON-TP02-B07TX5SW7J is the cheapest way to make your vacuum run like new again.

Compatibility

This filter is engineered to fit the Dyson DYSON-TP02-B07TX5SW7J series perfectly. It creates a tight seal to prevent dust leakage and protect the motor.

Features

  • HEPA Filtration: Captures 99.97% of dust and allergens.
  • Washable & Reusable: Rinse under cold water and let dry for 24 hours.
  • Motor Protection: Prevents dust from entering and damaging the vacuum engine.

Installation

Simply twist off the top cap or remove the bin to access the filter. Swap the old one with this new premium filter in seconds.

Installation Guide

1

Remove the dust bin.

2

Pull out the old filter.

3

Rinse (if washable) or replace.

4

Dry completely before re-installing.

Expert Deep Dive

Troubleshooting & Analysis

Problem Identification: Is Your Dyson Losing Suction Power or Emitting Odors?

Are you experiencing decreased suction power with your Dyson vacuum cleaner, model DYSON-TP02-B07TX5SW7J? Perhaps you’ve noticed an unpleasant odor while vacuuming, especially if you have pets at home. These issues can be incredibly frustrating, especially when you rely on your vacuum to keep your home clean and fresh. If your vacuum is blinking lights, producing bad smells, or showing error codes, you’re not alone. Many users face these common symptoms, indicating that it may be time to address the underlying problems. In this article, we’ll delve into the reasons behind these issues, provide troubleshooting steps, and explore how replacing your filter can lead to a more efficient and odor-free cleaning experience.

Troubleshooting Guide: Steps to Fix Common Issues

Before rushing to replace parts, let’s troubleshoot the common problems associated with your Dyson vacuum:

  • Check for Blockages: Inspect the hose and various attachments for any clogs. A simple blockage can significantly reduce suction power.
  • Inspect the Filter: The motor filter (Part: Filter R) can become clogged over time. Wash it under cold water without detergent and let it air dry for at least 24 hours. However, be aware that washing isn’t always sufficient; sometimes, a replacement is necessary.
  • Reset the Vacuum: If your vacuum is blinking lights, try resetting it by turning it off, unplugging it, and then plugging it back in. Wait for a few minutes before turning it back on.
  • Check for Worn Parts: Over time, the wear and tear of internal components can affect performance. Inspect the seals and other parts for signs of damage.

Cost Analysis: Original Brand vs Our Compatible Filter R

When it comes to replacement parts, cost-effectiveness is a significant factor. Below is a generic comparison table showing the annual costs of using the Original Dyson Filter R versus our compatible filter:

Item Original Dyson Filter R Our Compatible Filter R
Filter Cost $49.99 $24.99
Replacement Frequency (per year) 2 2
Total Annual Cost $99.98 $49.98

By choosing our compatible filter, you can save up to $50 annually while maintaining the same level of suction power and efficiency. It’s a smart investment that doesn’t compromise on quality.

Installation Pro-Tips: Getting It Right

Installing the new Filter R isn’t just about plugging it in. Here are some pro-tips to ensure you do it correctly:

  • Flush the Filter: Before installation, if you’re using a new filter, flush it with clean water for about 3 minutes to remove any residues.
  • Snap to Secure: When inserting the filter, push it firmly into place until you hear a click. This ensures it’s securely fitted and won’t come loose during operation.
  • Reassemble Carefully: If you had to disassemble any parts to access the filter, reassemble them in the correct order and ensure everything is tight to avoid air leaks.

FAQ Section: Addressing Your Concerns

Will this replacement void my warranty?

Using a compatible filter does not typically void the warranty of your Dyson vacuum. However, it’s essential to check the warranty specifics for your model to ensure compliance.

How long does the filter last?

Under regular use, the Filter R should be replaced approximately every 6-12 months. Factors such as the frequency of use and household conditions (like pets) can affect this timeline.

Can I wash the filter instead of replacing it?

Washing the filter can help remove some debris, but it might not restore full suction power, especially if the filter is heavily clogged. If you notice persistent issues, replacing the filter is the best solution.

Conclusion

Addressing suction power and unpleasant odors in your Dyson vacuum doesn’t have to be a daunting task. By understanding the common issues, troubleshooting effectively, and opting for a cost-effective replacement with our compatible Filter R, you can restore your vacuum’s efficiency and enjoy a cleaner, fresher home. Don’t let a faulty filter hold you back—invest in a replacement and experience the difference in your cleaning routine.

Specifications

Brand
Dyson
Model
TP02
Category
Vacuum
Replaces Part
Filter R

Replacement Reminder

Get notified when it's time to replace your Dyson TP02 filter. One email, no spam.